PetroMod v11(32bit)
+
The PetroMod 1D and 1D Express Tutorial v9.0 SP3
[Vous devez être inscrit et connecté pour voir ce lien]
How Install Schlumberger PetroMod v11 (32bit)
------------------------- First Setup the program -------------------------
1. Copy "ibfs32.dll" to C:\Windows\System32
2. copy all files in "PM11 patch 2" folder to C:\PetroMod11\WIN32\bin
3. Open "petromod11.lic"
- change "IOGeophysicist-PC" to "your comuter name".
- change first "27009" to "your Network Adress value"
- If you not change your network Adress Let it as it was.
4. Download and Setup "[Vous devez être inscrit et connecté pour voir ce lien]" or higher.
5. Open "SLBLicensing" from C:\Program Files (x86)\Schlumberger\Schlumberger Licensing\flex118
- press on "Stop" then press on "Add license file" and add "petromod11.lic".
- press on "Diagnostics" then press on "Start" then "ok".
6. If you see this message"the full path and debug is too long".
- from "file" menu select "Advanced options" and select "options file".
- Add options file and choose location of "petromod11.lic" Then press "ok".
- you will see new file "petromod11-20120820201128.BAK" in patch folder.
- Press "ok" and open the program.
+
The PetroMod 1D and 1D Express Tutorial v9.0 SP3
[Vous devez être inscrit et connecté pour voir ce lien]
- PetroMod petroleum systems
modeling software combines seismic, well, and geological information to
model the evolution of a sedimentary basin. The software predicts if,
and how, a reservoir has been charged with hydrocarbons, including the
source and timing of hydrocarbon generation, migration routes,
quantities, and hydrocarbon type in the subsurface or at surface
conditions.
- Petroleum systems models are 1D,
2D, or 3D large-scale geologic models. These models cover areas ranging
from a single charge area for a prospect to regional studies of entire
basins to resource assessments of mega-regional scale covering multiple
basins. The models provide a complete record of the evolution of a
petroleum system, including pressure and temperature history. They
relate the structural evolution of a basin to generation, migration,
accumulation, and loss of oil and gas in a petroleum system through
geologic time. Properties such as gas/oil ratios and API gravities can
be analyzed, understood, and predicted. A petroleum systems model
provides the only means to integrate all physical aspects (source, trap,
seal, and reservoir) and time (charge) to quantify and analyze
processes and reduce exploration risk.
- The simulator is the heart of the
PetroMod software suite, simulating the entire history of a sedimentary
basin from the deposition of the bottom layer onwards. PetroMod software
uses consistent simulators in 1D, 2D, and 3D, which means that all
technical features and tools are available—and identical—in all
dimensions. It also enables different simulation methods—Darcy, flow
path (ray tracing), invasion percolation (IP), and the PetroMod hybrid
Darcy/flow path/IP simulator—to be used with the same data models.
- PetroMod software determines
whether oil and gas have been generated, where and how much, when
migration occurred, and whether it filled the trap. The software models
the burial of source rocks through geological time, from their
deposition at the surface until they reach sufficient depth to generate
first oil and, eventually, gas as they descend deeper into the earth.
Various components of oil and gas are tracked as they are expelled from
the source and migrate upwards to fill traps, until either the buoyancy
forces break through the seal or the trap “fills and spills” so that oil
and gas migrate to other traps. PetroMod software predicts the location
of oil and gas accumulations, as well as important properties such as
API gravity of oil, gas/oil ratio, and viscosity.
How Install Schlumberger PetroMod v11 (32bit)
------------------------- First Setup the program -------------------------
1. Copy "ibfs32.dll" to C:\Windows\System32
2. copy all files in "PM11 patch 2" folder to C:\PetroMod11\WIN32\bin
3. Open "petromod11.lic"
- change "IOGeophysicist-PC" to "your comuter name".
- change first "27009" to "your Network Adress value"
- If you not change your network Adress Let it as it was.
4. Download and Setup "[Vous devez être inscrit et connecté pour voir ce lien]" or higher.
5. Open "SLBLicensing" from C:\Program Files (x86)\Schlumberger\Schlumberger Licensing\flex118
- press on "Stop" then press on "Add license file" and add "petromod11.lic".
- press on "Diagnostics" then press on "Start" then "ok".
6. If you see this message"the full path and debug is too long".
- from "file" menu select "Advanced options" and select "options file".
- Add options file and choose location of "petromod11.lic" Then press "ok".
- you will see new file "petromod11-20120820201128.BAK" in patch folder.
- Press "ok" and open the program.